Author Topic: Bhp at the rear wheel (Read 1960 times)

ninjaboy · « **Reply #50 on:** 02, July, 2007, 06:21:26 AM »

Clint

How can a NICE colour like green be banned??

i will have to search and find a Dyno near to me
also i have a scorpion can fitted and i heard that someone can get p/c on the cheap?

?

me might want one!! ':p'

« **Reply #51 on:** 02, July, 2007, 11:43:33 AM »

Quote (ninjaboy @ July 02 2007,06:21)

Clint

How can a NICE colour like green be banned??

i will have to search and find a Dyno near to me
also i have a scorpion can fitted and i heard that someone can get p/c on the cheap?

?

me might want one!! ':p'

Ron all us southern boys should try and do it on the same machine in that way we can have a good accurate full test that we all understand , Got mine done in whyteleafe -Caterham Fuch's Machine you can't beat them there the Bomb, Readings are far more Accurate on them, i got my power Commander for 150.00 then Customs Charges 39.00 bastards, but still got it for cheap

« **Reply #52 on:** 02, July, 2007, 11:48:52 AM »

Lee would be nice to see yours Dyno'ed at same place as were i went only round the corner!!!! Lets see if your Gixxer is holding out to what you say

'>

The Yeti · « **Reply #53 on:** 03, July, 2007, 12:00:22 AM »

Stop worrying about power outputs and...

Just ride the bloody thing.

Save yer money for the speeding fines and crash repairs ':baa:'

« **Reply #54 on:** 03, July, 2007, 12:06:15 AM »

Quote (The Yeti @ July 03 2007,00:00)

Stop worrying about power outputs and...

Just ride the bloody thing.

Save yer money for the speeding fines and crash repairs ':baa:'

Saying on those lines-Better spending it on Advanced Lessons,

Mind you i Did save a Wopping £600 on my Twin Exhaust Due to my Custom made Race Cans

'>

But yeah I Agree Lets get out there and Ride them Yeeeh -Hahhhhh.....

Grandma · « **Reply #55 on:** 03, July, 2007, 07:49:55 AM »

Quote (The Yeti @ July 03 2007,00:00)

Stop worrying about power outputs and...

Just ride the bloody thing.

Save yer money for the speeding fines and crash repairs ':baa:'

Never a truer word spoken, all my bikes are bog standard and I've had so much fun on them doing just about everything from commuting to rallies to track days.....and marshalling where it gets a bit hot but copes ':p'

Alex's 400 puts out 60bhp, just dynoed at Bob Farnham's and I rode it home from there last week, for it's size it really shifts and I remember Trouty running rings around us on the road a couple of years ago on a 250

'>

riz K5 · « **Reply #56 on:** 03, July, 2007, 03:36:15 PM »

Quote (Yamaha_Riders_Do_It_Better @ July 02 2007,11:48)

Lee would be nice to see yours Dyno'ed

I’ve still got my read out from the Dyno up at the Ace that time. I’ll have to dig it out and I’ll post it up.

It never had the G-Pack on it at the time!

« **Reply #57 on:** 03, July, 2007, 03:45:15 PM »

Quote (riz K5 @ July 03 2007,15:36)

Quote (Yamaha_Riders_Do_It_Better @ July 02 2007,11:48)

Lee would be nice to see yours Dyno'ed

I’ve still got my read out from the Dyno up at the Ace that time. I’ll have to dig it out and I’ll post it up.

It never had the G-Pack on it at the time!

Nahhhh that Dyno Report is Dis-Continued now ,you have to get a new report from the ultimate Fuchs Dyno machine !!!!

'> You never know you might of lost a bit of BHP

'> its your Chance to Prove yolur Rizla Has what it takes

'>

Dig it out Anyway and lets see and no Altering the numbers

'>

SMF_12 · « **Reply #58 on:** 03, July, 2007, 07:12:27 PM »

its not the 12bhp i thought it was at the back wheel

'>

its actually...

80.6 at the wheel
84 at the gearbox
88 at the crank

oopsie, i ment 33bhp officer, honest... :0

Snap · « **Reply #59 on:** 03, July, 2007, 07:15:26 PM »

Quote (Yamaha_Riders_Do_It_Better @ July 01 2007,21:45)

Son when you bringing your green machine to the dyno or are they Banned !!!

'>

Not you as well!!! Green rocks! ':p'

fatboy · « **Reply #60 on:** 04, July, 2007, 07:50:23 PM »

come on people get a life please .stay away from the dynos lol.

'>

« **Reply #61 on:** 05, July, 2007, 03:22:52 AM »

I Don't Really Care about my BHP Its Rapid that's all that Count's Now,

'> But it Ain't Gonna Stop Me Powering It Modding More Power In to it

'>

fatboy · « **Reply #62 on:** 05, July, 2007, 06:24:46 PM »

so your saying your a POWER RANGER LOL. ':p'

« **Reply #63 on:** 05, July, 2007, 06:28:59 PM »

Quote (fatboy @ July 05 2007,18:24)

so your saying your a POWER RANGER LOL. ':p'

I'm Proud to be a Power Ranger

'> Its alot better than looking like a HillBilly

'>

fatboy · « **Reply #64 on:** 06, July, 2007, 07:34:42 PM »

dam lol ive been found out

« **Reply #65 on:** 12, July, 2007, 09:36:19 PM »

Got the bike Mapped today :

Now riding even better Didn't think they would improve it but they did got it fully mapped For £70.00 Depending on how much mapping it needs which mine never needed much,

But i have Gains Running

172 BHP @ Crank
164.1 BHP @ Gearbox
157.5 BHP @ Rear Wheel

K & N High Flow Filter
Stock Exhaust

Same machine as Last week

Not bad Now is all i need is this Full Yoshi System not bad for £650 from the states

Yoshi full

When i get These babies then back in for another mapping and read out

'>

DEANO R6-R · « **Reply #66 on:** 13, July, 2007, 07:21:15 AM »

i have my power commander fitted just need to find an available date to get it dyno'd as soo as i get it done will let you all know the results.

« **Reply #67 on:** 13, July, 2007, 09:51:27 AM »

Quote (DEANO R6-R @ July 13 2007,07:21)

i have my power commander fitted just need to find an available date to get it dyno'd as soo as i get it done will let you all know the results.

Dean what Cans are running on your bike at the moment

?

Eddie clutch burner · « **Reply #68 on:** 14, July, 2007, 02:08:47 AM »

My poor wee bikes got about 110bhp, but that enough when I get into Dangermouses slipstream ':p'

DEANO R6-R · « **Reply #69 on:** 30, July, 2007, 09:23:00 PM »

had my r6 dyno'd today, its knocking out 110.5 not bad i suppose for a 6 i still have the standard air filter in and i really cant be arsed to knock out the cat seems like a hell of alot of work.

« **Reply #70 on:** 30, July, 2007, 10:30:29 PM »

Quote (DEANO R6-R @ July 30 2007,21:23)

had my r6 dyno'd today, its knocking out 110.5 not bad i suppose for a 6 i still have the standard air filter in and i really cant be arsed to knock out the cat seems like a hell of alot of work.

The Cat is a Piece of Piss trust me !!!

Deano what was the name of the Dyno run mate ?

BTW Thankyou very much for those Service books Really appreciate it mate I owe u 1

'>

DEANO R6-R · « **Reply #71 on:** 31, July, 2007, 01:42:16 PM »

I have it dyno'd at mistral's down southend way i havent had nothing adjusted yet i didnt have time there is room for a bit of improvement. ':]'

removing the cat you have to cut open collector box knock them out and weld back up. i dont have the time or tools to do it, and guys at work too busy too

'>

« **Reply #72 on:** 31, July, 2007, 01:50:57 PM »

Very Piss easy to do on R1 ...... Will totally Change your Dyno Chart But Yours is Probably giving you enough Power Anyway ...

DEANO R6-R · « **Reply #73 on:** 31, July, 2007, 09:47:46 PM »

is 110.5 good enough i suppose if you can hit 170 on the road thats good enough, i know a guy that comes into work has the same bike but has done everything for racing, full race exhaust system, air filter, power commander the whole lot and only knocking out 111 so im happy with my result after that.

i would know out the cat but as i said in the last post you have to cut open the collector box to remove them and then weld back together, which i dont have the facility for.

oh and completly off the subject, clint i guess you will be on the unity ride, are you starting at the ace???

Darkmonster · « **Reply #74 on:** 31, July, 2007, 10:11:50 PM »

300bhp....

1100bhp....

7000bhp....YES....REALLY!!

7500bhp.... ':crazy'

News:

Online Rider

Online Chat

Events

Author Topic: Bhp at the rear wheel (Read 1960 times)

The Yeti